单位名称：美满电子科技有限公司

专业要求：仪器科学类、信息安全类、自动化类、计算机类、电气类、电子类、软件工程类、微纳电子学类

学历要求：硕士

应聘方式：China-hr-staffing@marvell.com

截止时间：2016-01-30

联系方式：美满电子HR、021-61092800、China-hr-staffing@marvell.com

岗位介绍：

上海职位详情

 

• SoC Platform: IC Design Engineer (SOC)

 

• Responsibilities:

  -Work on IP and chip design;

  -Understanding architecture and protocols;

  -RTL design and verification;

  -Documentation;

  -Work closely with FPGA team for pre-silicon prototyping;

  -Work closely with software team for driver developments;

  -Travelling to US is not mandatory, but sometimes required.

 

• Qualifications:

  -MS or PHD in EE;

  -Good understanding of digital IC design;

  -Good team work spirit and strong problem solving skills;

  -Knowledge of Synthesis, STA and DFT is a plus;

  -Knowledge of SystemVerilog and UVM is a plus;

 

 

• SoC Platform: Software Engineer

• Description:

In this position, you will be working with the system architects, technical leaders and other developers to contribute to embed Linux BSP.

You will be responsible for the detailed development specifications, system performance profiling and you also will work with the validation team to ensure the system is thoroughly tested.

 

• Qualifications:

  -Master in Electronic Engineering or Computer Science major

  -Strong in c/c++/assembly programming skills

  -Deep understanding about SOC system

  -Good at Linux kernel and driver development

  -Hardware debugging experience is a plus

  -Experience with PCIE, USB, memory controller or NAND

  -FLash is a plus

  -Fluent communication in English

 

 

• CSI: Datacom System Engineering - Software Engineer

• Description:

This is an entry level, software engineering oriented system engineer position. The engineer will be part of the vertical system engineering team composed with hardware engineering, software engineering, firmware engineering, FPGA design engineering, signal integrity engineering, and others. The IC products to work with include Ethernet PHY/NIC/Switch/SoC, high speed SerDes based PHYs, DTV front end components, PLC PHYs, and so on. System engineering team is responsible for many post silicon engineering efforts like product validation, platform development, collateral development, technical support and so on.

 

• Qualifications:

-Test Automation Software Development.

-GUI Tool Software Development.

-Driver Software Development.

-Manufacturing Software Development.

-Department/Enterprise Software Tool Development. 

-BS/MS in EE/CE/CS.                                            

-Must have good C/C++ program skill.

-Must be familiar with MS Window system.

-Must have good knowledge with computer system and data network system.

-Must be willing to work in a multi-tasking, fast pace, team oriented working environment.

-Must be able to quickly absorb different kinds of knowledge and apply them in the works. 

-Working experience on software development are preferred.

-Familiarity with MS .net, Ethernet and network protocols are some pluses.

 

 

• Wireless Technology: GPS software engineer

• Responsibilities:

-Design and optimize algorithms for GNSS and/or hybrid positioning system based on GPS/GNSS, WiFi, BT (BLE), inertial sensors, etc;

   -Develop and optimize hybrid positioning software based on existed codebase;

   -perform algorithm and code optimization based on customer's requirement;

   -Make documents on algorithm design, simulation results, software implement and test cases.

 

• Qualifications:

-Master or PHD in EE, CS or geomatics with the knowledge on GPS or hybrid positioning technologies;

   -Familiar with programming languages, including C/C++, Matlab and Python, etc.

   -Understanding on ARM core architecture and embedded system;

   -Good personality and communication skills.

 

 

• Video: Software Engineer

• Responsibilities:

The candidate will be responsible for video decoder & encoder (MPEG2/MPEG4/H264/H265/VP8/VP9) driver development, integration and bug fixing, he will act as core development engineer to support AE team resolving critical bugs and also participating resolving system level video pipeline related issues.

 

• Qualifications:

  -Master degree in Electrical Engineering or Computer Science

  -C development experience;

  - Experience of one of MPEG2/MPEG4/H264/H265/VP8/VP9 decoder or encoder

 

 

• Datacom Digital Designer
• Job Description:  

Become a member of a world-class digital design team in providing high performance digital circuits for leading data communications and networking products, in 1gig and 10gig data rate. Team members participate in circuit architecture, circuit implementation, design review, layout, and silicon validation.

 

• Job Requirement:

-Participate in the architecture, design and verification of highly integrated networking SoC products.

-Job function include block level micro-architecture design, RTL implementation and verification,

   -logic synthesis, timing analysis, test pattern generation and silicon validation.

 MINIMUM REQUIREMENTS / EDUCATION:

-M.S.E.E with knowledge of logic design using Hardware Description Language and related design tools.

   -Knowledge of communication protocols such as Ethernet is preferred.

 

• Datacom Analog Designer
• Job Description:  

Become a member of a world-class analog design team in providing high performance analog and mixed mode circuits for leading data communications and networking products, in 1gig and 10gig data rate. Designers have opportunities to design high performance analog-to-digital converters (ADC), digital-to-analog converters (DAC), filter, adaptive equalizers, clock and data recovery (CDR) circuits, and phase-locked loop (PLL) or other timing circuits. Team members participate in circuit architecture, circuit implementation, design review, layout, and silicon validation.

• Job Requirement:

  -High performance CMOS analog design experience for communications

-Design experience in analog-to-digital converter (ADC), including but not limited to flash, 2-step (sub-ranging, folding), pipeline, cyclic, sigma delta, and other techniques.

-Design experience in digital-to-analog converter (DAC) for driving high precision output, such a 50ohm line driver.

-Design experience in filters and/or equalization, including but not limited to continuous time filter, discrete-time filters, finite-impulse response (FIR) filter, or decision-feedback equalizer (DFE).

  -Design experience in Serdes and timing circuits such as PLL, CDR, TX and RX functions.

-Design experience in other analog functions is a plus, such as bandgap, regulator, crystal oscillator, etc.

-Knowledge in signal processing and communication theories is a plus.

 

南京职位详情

 

• Wireless Technology: GPS software engineer

• Responsibilities:

-Design and optimize algorithms for GNSS and/or hybrid positioning system based on GPS/GNSS, WiFi, BT (BLE), inertial sensors, etc;

 -Develop and optimize hybrid positioning software based on existed codebase;

 -perform algorithm and code optimization based on customer's requirement; 4)

-Make documents on algorithm design, simulation results, software implement and test cases.

 

• Qualifications:

-Master or PHD in EE, CS or geomatics with the knowledge on GPS or hybrid positioning technologies;

-Familiar with programming languages, including C/C++, Matlab and Python, etc.

-Understanding on ARM core architecture and embedded system;

-Good personality and communication skills.

 

 

• Central Engineering: Analog IC Layout(Nanjing)-CE

• Responsibilities

Be a part of the Central Analog design team. Your main responsibility is custom analog layout. You will be responsible for all levels of analog layout from block level up to the Analog top level integration and verification. You will communicate and get directions from experienced analog design engineers to ensure high quality.

 

• Qualifications

  -Bachelor Degree of Electronics, Electronic Engineering or equivalen

  -Good communication skills in English.

  -Be familiar with Unix OS.

  -Understanding basic characteristic of transistor, resistor, capacitor and diode.

  -Experience with Cadence or Silicon Canvas layout tools is plus.

  -Experience with DRC/LVS verification tools is plus

 

成都职位详情 

• SoC Platform: IC Design Engineer (SOC)

• Responsibilities:

  -Work on IP and chip design;

  -Understanding architecture and protocols;

  -RTL design and verification;

  -Documentation;

  -Work closely with FPGA team for pre-silicon prototyping;

  -Work closely with software team for driver developments;

  -Travelling to US is not mandatory, but sometimes required.

 

• Qualifications:

  -MS or PHD in EE;

  -Good understanding of digital IC design;

  -Good team work spirit and strong problem solving skills;

  -Knowledge of Synthesis, STA and DFT is a plus;

  -Knowledge of SystemVerilog and UVM is a plus;

 

企业介绍：

Marvell Technology Group Ltd.成立于1995年，于2000年在纳斯达克上市（NASD：MRVL），是一家全球性企业，Marvell美国总部位于加州圣克拉拉，在全球各地拥有7000多名员工。公司在中国大陆，欧洲，中国香港，印度，以色列，日本，马来西亚，新加坡，中国台湾和美国均建有国际建设中心。作为一家顶级的无晶圆厂半导体公司，公司每年售出超过十亿颗芯片。Marvell在微处理体系架构和数字信号处理方面的专业知识，极大的推动大容量存储解决方案，移动与无线技术，网络，消费电子及绿色产品等开发平台发展。同时，借助于世界一流的工程及混合信号设计能力，Marvell可为所有客户提供最关键的核心器件和模块，从而帮助其在竞争激烈的市场中立于不败之地.
Marvell 在中国的总部位于上海浦东张江科技园区，并在北京、南京、合肥、成都、深圳等地设有研发和业务运营，上海研发中心是继美国总部以外的全球第二大研发中心。目前Marvell在中国的员工总数超过1900人，其中90%是技术研发人员。随着Marvell在中国业务的不断扩大，公司计划未来几年将中国研发中心的规模进一步扩展，逐步发展成为全球最大的研发中心。

访问数量: 6396